Used for cutting the foam blocks on the sheet given thickness.
Specifications:
Dimensions 4460h2500h2700.
Production features:
1) Supply voltage 3x380 V
2) The maximum power consumption of up to 5 kW (peak).
3) the size of the original block of foam rubber 2000 * 1000 * 1000
4) cut from the thickness of 5 to 240 mm.
5) indicative output (depending on the thickness of the cut) to 50 units per shift.
The requirements for production facilities:
1) The minimum floor area of cutting (without storage) - 40m2
2) The minimum ceiling height - 2.8 m
Distinguishing features:
1) The fixed block on the table is provided by vacuum
2) as the cutting tool is used tape width of 2.5 cm (butt joint - Germany)
3) the angle of attack (for cutting various thicknesses) is given by tilting the frame cutting
