Tuesday, December 10, 2013

THE EU PLANS TO REANIMATE EUROPEAN STEEL INDUSTRY

The EU plans to reanimate EUROPEAN STEEL INDUSTRY
THE EU PLANS TO REANIMATE EUROPEAN STEEL INDUSTRY

The European Commission and EU industry ministers called on the world#39;s largest steel company ArcelorMittal to delay plans to close steelmaking capacity up until June had adopted a program of resuscitation of the steel industry in Europe. This was announced by the European Commissioner for Industry, Antonio Tajani.

Recall that on 12 February the European Commission held a roundtable discussion with 13 ministers in charge of the industrial sector, the EU, member states, as well as representatives of industry associations. The initiators of the event were the ministers of Belgium, France and Luxembourg.

During the event, the roundtable participants agreed on a number of recommendations relating to trade, natural resources, climate change and energy policy, in order to resuscitation of the European steel industry, numbering 360 thousand workers.

According to the steel association Eurofer, last year#39;s steel consumption in the EU fell by 9.7%. In addition, this year the demand, including the replenishment of stocks may decline by 0.7%, but in 2014 will increase by 3%. However, the consumption will reach 146 million tons, which is 27% below the pre-crisis peak in 2007.

At the same time, the demand for steel outside the EU in developing economies stronger, but representatives of the European steel industry have pointed out that they have to leave the EU due to tighter regulation and rising costs.

Industry is facing rising costs for energy (unlike the U.S., where it is used cheap shale gas), its representatives say that the environmental ambitions of the EU simply lead to the fact that the manufacturers will pollute elsewhere.

Thus, the Commission has aimed to 2020 to reduce CO2 emissions by 20% compared to 1990 levels. By mid-century, as expected, the policy in terms of ecology will only become tougher.

According to Antonio Tajani, if steelmakers are moving outside the EU, then this is a serious problem for the workers, as well as new challenges for the wrestlers to climate change.

At the same time, the European commissioner on climate issues Connie Hedegaard said that the policy of reducing CO2 emissions entails minimal costs for steelmakers. Moreover, a number of metallurgical groups make millions of euros for emissions trading CO2.

The head of Eurofer and Austrian steelmakers Voestalpine noted that European steel producers have to pay for natural gas is 4 times more than in the United States, the electricity overpaid by about 40%. In addition, a significant cost item is labor remuneration fund and the reduction of emissions permits CO2.

`If, within five years the cost structure will not change radically, I predict that by 2030, steel production in the EU will decrease by half #39;, - he said.

All the details about the situation in the EU steel sector, read the material `Metallurgical decline of Europe #39;, published in the magazine` printovoy Metal Supply and Sales#39;.

SET A NEW RECORD FOR STEEL EXPORTS

Set a new record for steel exports
SET A NEW RECORD FOR STEEL EXPORTS

In 2012, U.S. exports have increased compared to 2011 by 2.2%, to 13.7 million tons, the according to the materials of the American Institute for International Steel (AIIS).

`Steel exports set a new record in 2012, an increase of 2.2%. Thus fell the previous record achievement of 2008 `, - the AIIS President David Phelps (David Phelps).

In this case, the best germinate in absolute terms, showed the market of Mexico, an increase of 700 thousand tons

However, the recession in the steel markets of NAFTA at the end of 2012 has called into doubt the increase in U.S. exports in 2013, said David Phelps. `However, it is possible that by the end of the 1st quarter of the U.S. market will metallurgists reason for cautious optimism #39;- he says.

According to the AIIS, in December, the U.S. steel exports decreased in November by 2.9% to 968 thousand tons, and in comparison with December 2011 - by 19.3%.

Recall that in November, the U.S. steel exports fell by almost 16% compared with October.

RUSSIAN BUSINESS WEEK BEGINS

RUSSIAN BUSINESS WEEK BEGINS
RUSSIAN BUSINESS WEEK BEGINS

From 18 to 22 March 2013 the Russian Union of Industrialists and Entrepreneurs holds an annual week of Russian business - a key event, which will be attended by representatives of the steel companies and which are discussed and suggestions are formed on important areas of cooperation between the state and business.

Representatives of business and government will discuss the financial and tax systems sector investment and innovation policy, trade and accreditation, compliance and enforcement and regulatory, human resources and labor, environmental and industrial safety. In the program of the Russian Business Week will be held the next annual Congress of Entrepreneurs, National Forum of self-regulatory organizations, the annual tax conference and a series of other events, including the crucial role played by conferences and round tables devoted to the chairmanship of the RSPP in #39;Business#39; Top Twenty.

Stakeholders for the traditions become Vice Chairman of the Government of the Russian Federation, representatives of the Presidential Administration of the Russian Federation and the Federal Assembly of the Russian Federation, heads of ministries and departments, members of the Bureau and the RSPP Board, heads of regional offices and industry associations RSPP.

High of participants confirms the effectiveness of the Russian Business Week as the site of formation of areas of cooperation between business and government. The live broadcast from the business site look zdec

We also offer you a review of the relevant committee of the RSPP for the past year. The Commission RSPP in the steel and mining complex at its meetings discussing issues of collective dominance in Russia and policies aimed at compliance with antitrust Russia. Decided to initiate the formation of the RSPP position on the need for rapid changes in the rules and practice in the field of collective dominance to prevent negative consequences for the business.


The position of the Commission is directed to the Committee on the development of competition, which is a specialized agency of the RSPP working on the issue.

A joint meeting of the Commission RSPP in the steel and mining complex and NP scrap recyclers `` Ruslom.kom on the performance of the decision of the Government of the Russian Federation #39;On the disposal of wheeled vehicles `. Adopted a resolution proposing to combine the efforts of the NP #39;Association of Russian Automakers#39;, the Russian Union of Industrialists and Entrepreneurs and the national self-regulatory organization and processors of scrap ferrous and non-ferrous metals, recycling of vehicles (NP scrap recyclers Ruslom.kom ``) to support the implementation of the recycling program cars in the Russian Federation.

At the joint meeting of the Entrepreneurs in the steel and mining complex and NP `Russian steel` discussed execution of orders of the President of the Russian Federation Vladimir Putin after a meeting on the development of the steel industry 16 July 2012 decided to consolidate the industry data on property tax with active part of fixed assets (machinery and equipment) and send a consistent position in the relevant federal executive authorities of the Russian Federation.

The result of the Commission#39;s work in 2012 was the preparation of two important events that determine the development of mining and metallurgical industry of Russia in the coming years and the prospects of investment activity in the sector.

There was a meeting on the state and prospects of the steel industry under the chairmanship of President Vladimir Putin, 16 July 2012, organized jointly with the Russian steel NP ``. With the active participation of the Commission a report on the status and prospects of the steel industry and related industries, made by the President of the Commission V.S.Lisin. The meeting was attended by members of the Commission A.G.Abramov, A.A.Mordashov, D.A.Pumpyansky, V.F.Rashnikov.


The result of the meeting was a list of instructions to be executed significantly stimulates the development of the enterprises included in the Commission, and lays the foundation for improving their functioning.
At a meeting with the Prime Minister of the Russian Federation Dmitry Medvedev on industrial safety 16 October 2012 approved the concept of changing the law on industrial safety, contributing to lower costs and simplify procedures for construction and operation of production facilities of member companies of the Commission. Questions have also been raised to improve the legislation in other areas. At the meeting, the Chairman of the Commission V.S.Lisin.


The result is a list of instructions to address the concerns of the members of the Commission and the business community as a whole.

Commission carried out extensive work on the preparation, coordination and promotion of the position of mining companies and representatives of other branches on the reform of the system of industrial safety, as well as the release of industrial enterprises from excessive regulation for control of procurement companies. As part of this work the Commission has inspired numerous analytical and expert submissions on the sites of various levels, including the meeting with the Prime Minister of the Russian Federation Dmitry Medvedev and President of the Russian Federation Vladimir Putin. In the adoption of the Federal Law #39;On Amendments to the Federal Law#39; On procurement of goods, works and services by individual types of legal persons #39;, as well as discussing the draft law#39; On Amendments to the Federal Law #39;On industrial safety of hazardous production facilities#39; and other legislative acts of the Russian Federation (in terms of improving the control and supervisory functions, and government services) `position is taken into account companies that are part of the Commission.

BRAZILIAN USIMINASPOVYSIT STEEL PRICES

BRAZILIAN USIMINASPOVYSIT steel prices
BRAZILIAN USIMINASPOVYSIT STEEL PRICES

The second-largest steel producer in Brazil, Usinas Siderurgicas de Minas Gerais SA (Usiminas), decided to raise the March prices for steel products by 6-12% for traders, said in a research report Banco Santander SA.

Usiminas each quarter of 2012 ended with a net loss. So, last week, the company reported in Q4 of last year, a loss of R $ 323.8 million, more than twice exceeded analysts#39; expectations. On the negative financial result was influenced by the fact that production costs are rising faster than steel sales.

Now, however, increasing the March price, the company expects to thereby increase annual EBITDA by about 85 million reais ($ 42.9 million).

Recall that from January 20, Usiminas steel prices have increased by an average of 5%. Moreover, in mid-February, Vice President Sergio Leite (Sergio Leite) admitted that from April prices may be increased for industrial customers. Last time prices for industrial consumers rose in July, 2012

DECREASING STEELMAKING TURKEY

DECREASING steelmaking TURKEY
DECREASING STEELMAKING TURKEY

In February 2013, Turkey has reduced the production of carbon steel compared to the same period last year by 3.9%, to 2.7 million tons, compared with January - by 7.1%. This is stated in the materials of Turkish Iron and Steel Producers `Association (DCUD).

Thus, last month the country#39;s steelmakers have increased production of the blast were up 5.4% to 787 thousand tons, but reduced the electric steel production by 7.4% to 1.9 million tonnes

DCUD notes that steel production in Turkey continues to decline. Recall that in January production figures steelmakers fell by 8.8% compared with 2012. In Association indicate that this situation is due to the decreasing demand on world markets, mainly in the EU.

In January-February 2013 the Turkish steel industry increased production of carbon steel compared to the same period last year by 6.5%, to 5.5 million tons Issue eletrostali was 3.9 million tons (-11%), blast steel - 1.7 million tons (+7.8%).

UW МАНИПУЛЯЦИОННОТЕХНОЛОГИЧЕСКИЙ `SET` AQUA

Manipulative UW-PROCESSING FACILITY #39;AQUA#39;

UW МАНИПУЛЯЦИОННОТЕХНОЛОГИЧЕСКИЙ `SET` AQUAIn the Department of Underwater Systems, Russian scientists have developed an underwater Manipulative and technological complex, which is currently in its final stage of construction. It is designed to perform underwater work at depths of up to 1000 m


The complex consists of two paddle, turning the TV cameras color and black-and-white, light directed and diffused light, the hopper for collecting objects, sonar, sonar, navigation, propulsion system, two pumping stations, control system, remote control with two set cranks and management and monitoring, tripping ustroystvo.Ves complex in the transport position is easily accommodated in the sea konteynere.Dlya transfer complex in the working position with the device platform and lifting device moves out of the container and the machine is ready for the descent of the water.


UW МАНИПУЛЯЦИОННОТЕХНОЛОГИЧЕСКИЙ `SET` AQUAThe layout of the equipment remotely operated device in Aqua Marine 20 #39;konteynereVypolnyaemye operations include: search facilities, inspection and determination of their origin, the collection of small objects, cleaning of the work area and other rabot.Apparat has the following characteristics: speed, 1.5 UW МАНИПУЛЯЦИОННОТЕХНОЛОГИЧЕСКИЙ `SET` AQUA m / s, cable length - 200, the number of thrusters - 6 dimensions - 2h1h9 m, weight - 600 kg, hopper capacity - 15 cubic dm, power fixtures - 1.5 kW, power - 25 kW, the number of television cameras - 2 , color TV system - pal, the number of executive bodies - 2, load capacity of the executive bodies - 200 BC.


The navigation system unit (weighing 27 kg) is gimballess orientation system, magnetic compass, video system, dynamic positioning. Positioning accuracy down to 10 mm. There is the possibility of tapping automatic modes. Accuracy of coordinate system is | 5 pm


Additional information is available on the website of the Department of Underwater Systems.

FLAGSHIP CONVERTER HEGEL HD25

FLAGSHIP CONVERTER HEGEL HD25
FLAGSHIP CONVERTER HEGEL HD25

Expanded its range of digital-analog converters Norwegian Hegel brand new top-end unit with HD25 index is based on a 32-bit chip and can receive audio from the parameters up to 24 bit / 192 kHz via the digital coaxial input and via USB. In all, there are four new items inputs - two coaxial, one optical port and USB. By default, the converter operates in the mode of the computer plug play, maintaining a flow of up to 24 bit / 96 kHz. But it is necessary to switch the corresponding switch on the machine and install the drivers, the device will be able to receive audio data to 24-bit / 192 kHz. To achieve the highest quality sound in the scheme of pre Hegel HD25 uses low-noise silicon-germanium transistors used in the reference product brand.


The recommended retail price of the model is 95 000.

AUDIO PROAKUSTIKA NEW CENTURY

AUDIO PRO-ACOUSTICS NEW CENTURY
AUDIO PROAKUSTIKA NEW CENTURY

Company Audio Pro prepared a very interesting set of speakers for home theater Avanto 5.0 HTS, whose sales have already started in Russia.

The system consists of two three-way floor standing speakers FS-20, equipped with a large 200-mm woofer on the side, a pair of 133-mm mid-range transmitters and squeaker. Speakers for the center and rear channels of this kit are based on the same 114-mm woofers and the same tweeter as in the front speakers. Subwoofer in this system is not, however, given the potential of stereo bass at first without it and you can do without.

Acoustics AudioPro Avanto 5.0 HTS has a gorgeous leather exterior trim and natural wood, and ideal for the modern interior.

Acoustic sets Avanto has an energetic and precise sound, and is perfect for use in large rooms. Thanks to stable impedance and high sensitivity of these speakers will go well with AV-receivers popular brands.

SUPPLEMENT TO IMAGINE IMAGINE SERIES OF PSB SPEAKERS

SUPPLEMENT TO IMAGINE IMAGINE SERIES OF PSB SPEAKERS
SUPPLEMENT TO IMAGINE IMAGINE SERIES OF PSB SPEAKERS

The popular series of columns Imagine PSB Speakers joined by two innovative wall-mounted models. It is understood that the sound quality - this is not the aspect which the developers of modern flat-panel TVs give the highest priority, so the speakers PSB Imagine W1 and W3 are the perfect solution to this problem.

The new low-profile wall speakers W1 and W3 depth of only 7.6 cm have a black glossy finish, industrial design and fit that will complement the best displays.

Imagine W1 - a one-channel speaker, which can be mounted both horizontally and vertically, and used for the front left, or center channel, as well as surround speakers. Two of these speakers make a perfect stereo pair for high-quality sound.

Imagine W3 - column, which combines the left, center and right channels, can be installed at the surface or placed on a wall. Specially designed for each channel speakers are in separate compartments within the housing, so they act as three separate speaker.

In addition, new wall mounted models can be used in combination with other speakers PSB, thus building up its own speaker system for home theater.

As is the case with all devices made PSB Speakers, the final fitting of the sound of the speakers dealt Paul Barton from the National Research Council of Canada.

For simplicity, wall-mounted or free-standing speakers complemented by a set of brackets, auxiliary template and table top stand. Imagine W1 and W3 are now on sale at the manufacturer#39;s recommended price of 599 and $ 1199, respectively.

SPEAKERS PIOSOUND GOLDEN EAGLE

SPEAKERS PIOSOUND GOLDEN EAGLE
SPEAKERS PIOSOUND GOLDEN EAGLE

The Dutch company has released PIOSound floor electrostatic speakers Golden Eagle, which came on the same line as the model Eagle.

I `Golden Eagle` separate sections are responsible for the emission of both high and low frequencies. This separation allowed to increase the sound pressure and lower distortion. Radiating membrane itself is made in the same - in the Netherlands, by the deposition of conductive nanoparticles.

These speakers can sound from 38 Hz to 22 kHz, sustaining power of 150 watts. Speakers imyut 4 ohms and sensitivity of 86 dB.

PRESENTED HEADSET JAYBIRD BLUEBUDS X WITH BLUETOOTH INTERFACE

PRESENTED HEADSET JAYBIRD BLUEBUDS X With BLUETOOTH INTERFACE
PRESENTED HEADSET JAYBIRD BLUEBUDS X WITH BLUETOOTH INTERFACE

Shown in the figure the company has released a wireless headset JayBird. Novelty called BlueBuds X. Go to the mobile device is connected via interface Bluetooth.

Continuous operating time between charges headset built-in battery, according to the manufacturer, is eight o#39;clock. In standby mode, the autonomy of the stock reaches 250 hours to charge the battery takes 2.5 hours.

Headphone impedance is 16 ohms, sensitivity - 103 +2 dB (at 1 kHz). The output power is 12 mW (RMS), total harmonic distortion is less than 5% (1 kHz, 1 mW). Frequency Response 20-20000 Hz declared equal.


Sensitivity omnidirectional microphone technology with MEMS, is -38 +3 dB.

The device complies with the Bluetooth Class 2.1 + EDR and support profiles Handsfree 1.6, Headset 1.1, A2DP 1.2 and AVCRP 1.4. The headset can `bind #39;to eight devices simultaneously, switching between them by pressing a button on the remote control. In addition, the console provides playback control (AVRCP) and challenges, as well as volume control, initialize the connection to the mobile device, switch off the power. Product dimensions - 22 x 29 x 13 mm, weight - 13.8 g

There are two color options Headset: Midnight Black and Storm White. Any one of them will cost $ 170.

DIGMA P1 MP3PLEER FOR SAFETY-PIN

DIGMA P1: MP3-PLAYER WITH SAFETY-PIN
DIGMA P1 MP3PLEER FOR SAFETY-PIN

In the line of MP3-player brand Digma a new compact model P1, made in the form of a badge with a diameter of 45 mm and a weight of 16.4 g for wearing clothes with a safety pin. The device is offered in a variety of design options, `I can not hear you #39;,` Snake `,` Union Jack `,` Hot Heart#39; and #39;Alien#39;.

The control buttons are located on the back of the player. Specifications reported having 4 GB of internal memory, the ability to play MP3 / WMA / WAV for 11 hours, 7 EQ modes.

The absence of the screen somewhat limits the capabilities of the device, but for the player to #39;pin#39; display hardly crucial. Connect and charge the internal battery manufactured by for USB 2.0, however, the recording speed is not reported.

Included are headphones and a USB-cable. The suggested retail price of new items is 750 rubles. A similar but more petite model G1 weighing 10.8 grams sells for about 800 rubles.

BLYRAY PRESENTED BY IO DATA RECORDER

SUBMITTED BLY-RAY RECORDER OF IO DATA
BLYRAY PRESENTED BY IO DATA RECORDER

On the issue of an external portable writing Bly-ray optical drive BRP-U6DM2 in black with dimensions 137 x 154 x 20 mm, the company said IO DATA.

The unit weight of 630 g is connected to a computer via USB 2.0, the cable and the device during transport can be put away into the opening of the groove in the back of the case. As for the top speed record, it is equal to 6x disc BD-R (SL / DL), 4x discs BDXL, 2x discs BD-RE, 8x discs for DVD-R / + R / + RW, 6x for CDs DVD-R DL / + R DL /-RW, 5x disc DVD-RAM, 24x for CD-R discs and 16x for CDs CD-RW.

This model provides a one-year guarantee of quality from the manufacturer. It goes on sale in the middle of next month for $ 178.